
IMPORTANT: FOLLOWING DIRECTIONS FOR THIS ACCESSORY IS ESSENTIAL
THE ADHESIVE MUST BE ACTIVATED TO FUNCTION PROPERLY
INSTRUCTIONS
-
Ensure your rifle stock is clean and dry
-
Position the Jaw Bumper on the flattest area below the arch over the top
-
Remove adhesive backing and gently adhere it to make sure it is in the right position
-
Press down firmly all over the part repeatedly as the adhesive is pressure sensitive and requires activation
-
Wait a few minutes and press down all over the part again. This will ensure the adhesive activates.
FAQS



-
The pressure sensitive adhesive is semi-permanent. The Jaw Bumper will stay on for a long time if adhered properly. It can also be used as a disposable part.
-
With wooden stocks we recommend using the Jaw Bumper as a disposable part. The adhesive will generally protect the finish and not damage it but over a period the rest of the stock may get discolored.
-
It is recommended that the Jaw Bumper be adhered within a year of purchase.
-
The product should be applied in temperatures above 60 degrees.
-
Although you can use the Jaw Bumper immediately the adhesive will be activated to 90 % after 24 hours. It will be 100% after 72 hours.
-
The Jaw Bumper is universal and can be applied to the either side of a stock for right or left handed shooters.